Steel supply for buyers who need it right the first time
Chunkang Metal is a Chinese steel manufacturer and exporter with 10+ years of import and export experience, supplying stainless, copper, aluminium, carbon, galvanized and alloy steel in plate, coil, pipe, bar and profile form. Factory in Liaocheng, Shandong; sales office in Wuxi, Jiangsu; ISO and CE certified; 5,000 tonnes annual export capacity.
A producer and exporter, not a catalogue
- Headquarters
- Liaocheng, Shandong — China's steel production centre
- Sales office
- Wuxi, Jiangsu
- Experience
- 10+ years of import and export
- Export capacity
- 5,000 tonnes per year
- Certifications
- ISO certified, CE certified, registered trademarks
- Main markets
- Qatar, Malaysia, Indonesia and other countries
Six families, five product forms
Every family below is stocked or produced as plate and sheet, coil and strip, pipe and tube, bar and rod, or profile. Grades, equivalents and finishes are listed on each family page.
Stainless steel
Stainless steel is a chromium-alloyed steel with a passive surface layer that resists corrosion in acids, alkaline gases and solutions.
- 304 / 304L
- 316 / 316L
- 321
- 310S
Copper
Copper is specified where electrical and thermal conductivity matter more than strength: heat exchangers, refrigeration circuits, busbars, roofing and architectural work.
- C11000 (ETP)
- C12200 (DHP)
- C12000 (DLP)
- C70600 (90/10 Cu-Ni)
Aluminium
Aluminium is chosen for its strength-to-weight ratio and its natural oxide layer.
- 1050 / 1060
- 1100
- 3003
- 5052
Carbon steel
Carbon steel is the default structural and fabrication material: predictable welding behaviour, wide availability and the lowest cost per tonne of the families on this site.
- Q235B
- Q345B
- SS400
- A36
Galvanized steel
Galvanized steel is carbon steel protected by a hot-dip zinc layer that sacrifices itself before the base metal corrodes.
- DX51D+Z
- SGCC
- S350GD+Z
- Z120 / Z275 coating
Alloy steel
Alloy steel adds chromium, molybdenum, manganese or nickel to carbon steel to raise hardenability, strength at temperature or wear resistance.
- 42CrMo / 4140
- 40Cr
- 20CrMnTi
- 15CrMo
Import and export experience across six material families.
Annual export capacity from the Liaocheng factory.
Quality management and conformity certification held.
Standard delivery, confirmed per order on the quotation.
Where the material goes
The same mill supplies six very different industries. Each one is specified differently, which is why the grade conversation comes before the price conversation.
Quoted most often
Specification summaries for the three products buyers ask about first. Every product page carries composition, mechanical properties and packaging detail.
304 / 304L
304 (UNS S30400, EN 1.4301) is the most widely used austenitic stainless steel: 18% chromium, 8% nickel, non-magnetic in the annealed condition and suitable for food-contact, architectural and general fabrication.
| Grade | 304 / 304L |
|---|---|
| Standard | ASTM A240, EN 10088-2 |
| Finish | 2B, BA, No.4, HL, 8K |
| Lead time | 7–15 days |
316L
316L (UNS S31603, EN 1.4404) adds 2–3% molybdenum to the 18/8 base, raising resistance to pitting and crevice corrosion in chlorides.
| Grade | 316L |
|---|---|
| Molybdenum | 2.00–3.00% |
| Finish | 2B, BA, No.4, HL |
| Lead time | 7–15 days |
321
321 (UNS S32100, EN 1.4541) is a titanium-stabilised austenitic grade that resists intergranular corrosion after welding and performs in continuous service up to about 870 °C.
| Grade | 321 |
|---|---|
| Stabiliser | Titanium ≥ 5×C |
| Standard | ASTM A312, A240 |
| Lead time | 7–15 days |
From inquiry to shipment
Specification
Send grade, form, size, finish and quantity. A drawing or standard reference is enough to start.
Quotation
Price, lead time, packing and payment terms in writing. Samples can be arranged before the order.
Production
Material is rolled, cut and inspected, with an EN 10204 3.1 mill certificate matched to the heat number.
Shipment
Export packing, container loading and the full document set released against your payment terms.
Answers before you ask
What does Chunkang Metal supply?
Six material families — stainless steel, copper, aluminium, carbon steel, galvanized steel and alloy steel — supplied as plate and sheet, coil and strip, pipe and tube, bar and rod, and profile. The factory is in Liaocheng, Shandong, with a sales office in Wuxi, Jiangsu.
Can you send samples before an order?
Yes. Free samples are available, with express shipping to customers worldwide. Tell us the grade, form, thickness and surface finish you need and we will confirm the sample lead time with the quotation.
How long does delivery take?
Standard delivery is within 7–15 days. Exceptional tonnages or special specifications take longer, and the confirmed lead time is stated on the quotation and on the order confirmation.
What are your payment terms?
For orders up to USD 1,000, payment is 100% in advance. For orders above USD 1,000, terms are 30% T/T in advance with the balance before shipment, against a B/L copy, or under an L/C at sight.
Which markets do you already export to?
Customers include buyers in Qatar, Malaysia and Indonesia, among other countries. Annual export capacity is 5,000 tonnes.
What information should I send with an inquiry?
Grade, product form, thickness, width, length, surface finish, quantity and any standard or certificate requirement. If you have a drawing or a material specification sheet, send it by email and we will quote against it directly.
Ask us directly
Five sales contacts, each on WhatsApp and email. Send a photo of the part or the specification sheet and we will read it.
Get a specification and a price
Reply within 24 hours, Monday to Saturday. Every shipment ships with a mill test certificate, and free samples are available before you commit to a production order.
- EN 10204 3.1 mill test certificate with each shipment
- Free samples with express shipping worldwide
- English-speaking sales desk, five named contacts